Portable Kisakurek Testers
Flow,Pressure and Temperature
400lpm and 400bars.0-120 C degree
The Kisakurek Digital Flowmeter measure flow,pressure and temperature.The Kisakurek Flowmeter are designed to see the performance of hydraulic pumps,motors,valves and hydraulic transmissions.
This flowmeter can easily spot the hydralic system faults,reducing time lost for system problems and helping easy maintenance.
The Flowmeter has an Aliminum Block and digital display ,manometer and loading valve.The
Loading valve helps the simulation of working pressure when the machine is on operation.
-Accurate measurement of flow,pressure and temperature.
-Bi-Directional for unstricted connection and simple testing.
-Easy to operate controls.
-Economical low power consumption from standard battery.If requested, a car 12V supply possible and 12V dc supply cable provided without battery.
-Portable and light weight with angled case for easier wiev and cleaning.
Kisakurek Tester 400 Specification:
Temperature:0,120 Degree C,
Pressure range:400 bar max.
Port size; 1”BSPF
Flow block connection by flexible hoses 1-2 metres.
Measurement and indication-------------------------------------------
Measured by the electronic count and axial turbine designed to minimize the effect of variation in temperature and viscosity.The dital display reads in lpm.
Accurarcy :1% of FS.
Sensed by a PT100 sensor in the oil flow for fast response.Temperature is permanently displayed in Degree C.
Glycerine filled pressure gage :0-400 bar connected by tube to the flow block.
Accurarcy ;1.5% of FS.
Seals:Viton seals compatible with oil,water/oil emulsion are fitted as standard.
High tensile aluminium block houses a six blade turbine rotating on a stainless steel bearing and shaft.Built in flow straigteners reduce flow turbulence and allows accurate flow measurement in both directions.
The integral loading valve permits progressive pressure loading in either flow directions.
Kısakurek 400 : 210mm length ,220mm height,110mm with,Mass 6.5Kg.